A Guide to Proper attic insulation calgary for your home

According to the University of Georgia’s extension experts, attic is the most efficient place for your home to be insulated. An easy way to determine sufficient attic insulation calgary is to measure its thickness. While the R-value for other areas of your home can be lesser, the attic is recommended to have at least a value of R-49. It is the attic where most of the energy is lost from a home. So it is important to seal it off properly for any type of air leaks.

Types of Attic Insulation
Attic insulation can be installed for different types of homes.

* You may have a newly built house
* You may have an older house with or without attic insulation
* You may want to install new attic
* You may want to upgrade or top up the existing attic insulation
* You may want to install attic insulation for roofs having difficult access

Best Practices in Attic Insulation
When choosing the right attic insulation or upgrade company, make sure that they follow the best industry practices. This includes:

* Not leaving any wastage after the installation
* Installations are carried out by qualified and experienced professionals
* Using only high quality insulation materials at cost-effective prices
* Faster and proper installation without causing disturbance to your regular routine

Choose a home insulation company that specializes in attic insulation. You can come across several insulating contractors, but very few of them are specialists in attic upgrades. Some companies may also provide additional services such as insulating light tunnels, trapdoors and pipework. Choose a service based on your requirements.

Free Estimation and Quote
You will have to get your attic insulation evaluated before you make any decision about the type of insulation. The right attic insulation company will provide a free survey and quote. Their specialists will visit your house and check the attic before giving an estimate. They should also be able to provide you contacts of their previous customers so that you could learn about their service quality.

Care with Amount of Insulation
The depth of the insulation in the attic will depend on your climate zone. Make sure that your installer discusses this with you. Besides, the insulation should be evenly spread out in the attic and it should be ensured that it meets the minimal depth requirement. If it doesn’t, then you haven’t installed reliable insulation. While the material must provide sufficient shield against heat transfer, it should also be laid out keeping in mind the requirements for vapor barrier.

Consider all these factors before you install new attic insulation calgary. Only and experienced and well-established company with good reputation will be able to provide you proper guidance as regards to the choice of the right insulation for your attic.

The Author is an experienced professional in the home insulation industry. He started his career catering to various home insulation requirements before specializing in attic insulation calgary. He emphasizes the importance of properly insulating attics because this is where a home loses most of its energy from. He likes to write and share his knowledge with his followers by positing informative articles like these from time to time.

More Upgrade Home Articles

Insulation Upgrade Reduces Carbon Footprints

A term you probably hear bandied about a lot these days is “carbon footprint.” When you hear this term, it’s probably followed by a discussion on how to reduce it. What this usually means is how much energy you use on a daily basis. Most of the energy consumed is made from burning hydro-carbons such as gas and oil so that’s why the word “carbon” is used.

The negative effects that this has on the environment is pretty well known, thus people continually try to cut down on the energy used. If you want to help in this, start at home. That’s where most of the energy that utilizes electricity and gas and oil is found. So if you’re serious about reducing your personal carbon footprint, this is where to start.

To begin with, you can upgrade your window glazing to decrease heat loss, use solar panels to supplement using electricity, and just basically be more energy conscious. Turn off things after you’re finished with them. This includes lights and the television or computer when you leave a room.

Insulation is one of the biggest areas where you can make a difference at home. Heating and cooling your home uses up a ton of energy. In lots of cases, this air goes right through the walls and the roof. When your home is well insulated, the heat and cooling air is trapped within, allowing you to adjust your thermostat accordingly. You’ll be amazed at how much energy and money you can save.

To trap the maximum amount of heat, your home must be completely insulated all over. This includes inside your walls, under your floors and in your attic. In fact, the attic is the most important part of your home to be well insulated. Heat rises, so most of the heat loss goes right through your roof. The best types of attic insulation are blown in or mineral wool. If you choose mineral wool insulation, you need 10 to 15 inches deep of high quality mineral wool offering 100 percent coverage. If depth is an issue, try insulation made of foam board. It offers the same benefits but is 50 percent less deep.

If you have questions regarding whether or not your insulation is sufficient, you can always get a free energy inspection from your electric company. This will let you know where you stand.

Home Improvement – Adding Insulation

Years ago the importance of over insulating your house was minimal. Yes, it would take a little more oil to heat the house but, at the same time, adding additional insulation was very expensive. I’m addressing oil because in a lot of areas natural gas was not available at that time. Most homes had, and still do have, oil burning furnaces. Today, however, all this has changed. Insulation is now inexpensive; while the price of fuel oil is soaring.

Nevertheless, there are solutions to this problem. You don’t have to completely demolish your home in order to beef up its’ insulation value. Instead, you can simply add insulation to your existing home in a variety of ways. First there is loose-fill insulation. This type of insulation is usually blown into any walls, floors, attics or any irregular or inaccessible crawl spaces that you can find. Blown in loose-fill insulation can even be used to fill in empty spaces that were left when the original insulation was installed.

Next, blanket insulation is fairly easy to add to the exposed areas in the attic.

These blankets can be cut to fit any size space. However, you must wear safety clothing and use protective equipment when working with this type of insulation. There is also spray-foam insulation. This type of insulation can be used to fill in spaces that exist under switch plate covers and around window frames. You will be amazed by the quantity of cold air that can seep through an electrical switch plate cover.

So, as you can see, lowering your energy bills can be achieved by simply adding extra insulation in your existing home. Any time and physical work that you devote to this job will result in a warmer, more comfortable place for you to be.

John is the author of Flat Fee MLS articles for Flat Fee Listing. You can find more information at Flat Fee MLS Listing.

Home insulation contractors can make a difference

Article by Alan Wulz

Everyone has spent one night in a poorly insulated structure. Perhaps it was an inexpensive motel or a camping tent; it probably didn’t take long to wish for a comfortable night’s sleep. Comprehensive insulation installed by licensed Insulation Contractors can give a homeowner peace of mind and comfortable living.

Energy saving leads to money saving in a household with good insulation. Insulation Services include but are not limited to attic, wall and subfloor insulation, caulking, window and pipe insulation and interior wall insulation. Licensed Insulation Contractors can evaluate the current R-Value you have in your existing home. R-Value is a means of measuring heat resistance. R-Values are set by local building codes and vary from area to area. The higher the R-Value, the higher the heat resistance allowing your home to stay cooler in summer and warmer in winter. Insulation Contractors specialize in these requirements and generally charge about the same amount it would cost to buy insulation material from a home improvement store. Insulation Contractors have safety equipment, trained installers and will guarantee their work. All Insulation Contractors are licensed by the state in which they perform their work. State Contractor’s License Boards oversee that licensing and also provide consumer complaint support. Homeowners can go online and see if their proposed contractor is reputable using services from these licensing boards. Those points alone make it worthwhile to hire a licensed Insulation Contractor rather than do-it-yourself.

Home insulation choices should not be taken lightly. There are a number of insulation materials available and each one has specific benefits to its application. Many Insulation Contractors will specialize in a particular material and application. In an existing home, attics and walls can have fiberglass, recycled or organic materials either laid in as a “batt” or blown in as a fluffy fill. New construction or remodeled homes may benefit from materials that are sprayed on wet and dry over time. Sprayed on materials also vary in weight, drying time and mold inhibiting qualities. Each choice has pros and cons. It is through the expertise of Insulation Contractors that the proper materials can be discerned.

Pipes can be insulated in a home to keep hot water hot and conversely, cold water cold. Pipes can be wrapped with fiberglass batts or a clay-like material. Water heaters can be wrapped with fiberglass blankets. There is even variety available among the manufacturers of fiberglass materials. Some have more recycled content than others. One company carries a complete line of formaldehyde-free material that eliminates odor that can come with new fiberglass insulation. Insulation Contractors can expertly locate areas that may be lacking in home insulation. They can prepare a bid with multiple options to fit any budget and any need. There are a variety of money saving applications available to keep seasonal air out and comfortable temperatures in.

Home insulation that is properly evaluated and installed can make a big difference in a homeowner’s budget. Savings are not only available through smaller power bills, but there are local power company rebates and Federal Tax Credits that can nearly offset the expense to upgrade home insulation.

It is worthwhile to meet with a licensed Insulation Contractors to see what the different type of insulation services they can offer you and how affordable a comfortable home can be.










More Upgrade Home Articles

Make a difference with Home Insulation contractor

Article by Mark

Everyone has used one night time in a poorly insulated structure. Perhaps it was an reasonable motel or a camping tent; it perhaps didn’t take prolonged to expect for a comfy night’s sleep. Comprehensive insulation installed by licensed Insulation Contractors can give a homeowner peace of head and comfy living.

Energy accumulating leads to currency accumulating in a in the home with good insulation. Insulation Services include but are not limited to attic, wall and sub floor insulation, caulking, window and pipe insulation and indoors wall insulation. Licensed Insulation Contractors can evaluate the existing R-Value you have in your existing home. R-Value is a method of estimating heat resistance. R-Values are set by provincial makeup codes and vary from paddock to area. The higher the R-Value, the higher the heat resistance commending your home to continue cooler in summer and warmer in winter. Insulation Contractors specialize in these conditions and commonly assignment come seal the same measure it would charge to pay for insulation material from a home developments store. Insulation Contractors have safety supplies, accustomed installers and will promise their work. All Insulation Contractors are licensed by the declare in which they accomplish their work. State Contractor’s License Boards organize that licensing and also deliver consumer illness support. Homeowners can go online and suppose if their planed contractor is decent engaging services from these licensing boards. Those points alone generate it worthwhile to hire a licensed Insulation Contractor alternatively do-it-yourself.

Home insulation picks ought not be extracted lightly. There are a diagram of insulation materials available and each one has actual superiority to its application. Many Insulation Contractors will specialize in a individual material and application. In an existing home, attics and walls can have fiberglass, recycled or organic materials either laid in as a “batt” or blown in as a fluffy fill. New erected plan or remodeled homes may superiority from materials that are sprayed on wet and dry through time. Sprayed on materials also vary in sinking implement, drying time and mold inhibiting qualities. Each pick has pros and cons. It is through the technical knowledge of Insulation Contractors that the proper materials can be discerned.

Pipes can be insulated in a home to save hot water hot and conversely, cold water cold. Pipes can be wrapped with fiberglass batts or a clay-like material. Water heaters can be wrapped with fiberglass blankets. There is even assortment available among the production plants of fiberglass materials. Some have more recycled content than others. One business sustains a achieve row of formaldehyde-free material that gets rid of odor that can come with novel fiberglass insulation. Insulation Contractors can expertly locate paddocks that may be lacking in home insulation. They can prepare a bid with multiple choices to fit any budget and any need. There are a assortment of currency accumulating submissions available to save seasonal sky out and comfy temperatures in.

Home insulation that is properly evaluated and installed can generate a high difference in a homeowner’s budget. Savings are not simply available through worse vitality bills, but there are provincial vitality business rebates and Federal Tax Credits that can virtually offset the expense to upgrade home insulation.

Insulation Seattle is home and other building insulating contractors. Hire them for Four Seasons Insulation.